I/O Menu

The I/O Menu features controls to adjust the inputs and outputs of CSR.

These controls are very useful for creative changes to the stereo image. For example, by regulating the In Image, all mono information can be excluded from the reverb sound, allowing you to custom tailor the audio that will be affected by the reverb.

I/O Munu parameters:

• IN LEVEL: input level of the reverb.
• OUT LEVEL: output level of the reverb.
• MIX: increases and decreases the amount of reverb in the signal. 0% is unprocessed sound, 100% is all reverb.
• IN IMAGE: controls the stereo image of the input before it is processed through the effect. This control also allows you to change the signal from normal stereo to mono and manipulate the phase of the signal. For example, a value of –45 swaps left and right channels, 0 is mono, and 45 is normal stereo. With a setting of 90, all mono will be excluded from the signal.
• OUT IMAGE: controls the stereo image of the affected signal. With a value of –360 to +360, this control extends the stereo field of the processed sound. This control can be used to create mono, stereo, or surround type effects. It can also be changed in real-time or automated using the Modulation Matrix or Macro Controls.

4/11