ARC X Immersive
ARC X Immersive
ARC X Immersive
ARC X Immersive
ARC X Immersive

ARC X Immersive

Instantly calibrate any immersive studio

Room calibration for immersive monitoring up to 9.1.6

ARC X Immersive simplifies multichannel and immersive room calibration with a fully automated workflow that measures and aligns your entire monitoring system as a single, coherent setup. Precise level, timing, and subwoofer integration ensure accurate spatial imaging, a well-defined phantom center, and consistent tonal balance across every channel. Going beyond basic EQ, ARC X Immersive delivers comprehensive room correction that helps mixes translate reliably across playback systems. Calibration is stored and processed directly within ARC-enabled iLoud monitors or ARC Studio hardware, ensuring correction is always active without requiring a DAW or plug-ins. The result is a faster setup, more confident mix decisions, and an immersive monitoring environment you can trust.
System Requirements
Mac® (64-bits)
Minimal: Apple M1 or Intel® Core i5 Processor, 4 GB of RAM, macOS® 10.15 or newer (macOS 11 or newer required for Apple Silicon Processors).
Supported Plug-in formats: Audio Units, VST 3, AAX.
Works with any audio interface with a phantom powered XLR microphone input and a pair of outputs for monitoring.
44.1 kHz or 48 kHz sampling rate is required for the measurement process.
Windows® (64-bits)
Minimal: Intel® Core i5 Processor or equivalent, 4 GB of RAM, Windows 10 (64 bit) or newer.
Supported Plug-in formats: VST 3, AAX.
Works with any audio interface with ASIO drivers, a phantom powered XLR microphone input and a pair of outputs for monitoring.
44.1kHz or 48kHz sampling rate is required for the measurement process.
Requires an OpenGL 2 compatible graphics adapter.
See manuals here
ARC X Immersive

Immersive calibration, simplified

ARC® X Immersive is the latest expansion of ARC X , extending its calibration engine from stereo and stereo-plus-sub systems to full immersive monitoring setups up to 9.1.6. It eliminates guesswork and transforms your room into a precise, reliable reference environment.\n

OVERVIEW

From stereo to full immersive

Full immersive calibration

ARC X Immersive transforms complex calibration into a guided, repeatable workflow.
It treats your entire speaker array as a single system, then automatically aligns levels, timing, phase, and room response across all channels.
What once required hours, or even days of manual adjustment, now takes minutes and delivers greater precision and consistency.
ximm-feat-sol

Not just easier, fundamentally better

Traditional immersive calibration relies on approximations, SPL meters, manual EQ, and trial-and-error workflows.
Some automated systems improve on this, but often apply only basic parametric EQ without full system alignment.
ARC X Immersive goes further.
It delivers full-range correction across every channel, precise phase alignment, and accurate subwoofer integration, all working together to perfectly calibrate the entire system.
The result is not just faster setup, but clearly better sound and more reliable translation.

Calibration: Trust what you hear

Every surface in your room colors your sound — introducing distortions that compromise your mix. ARC X removes that guesswork.
The same calibration engine now applies to immersive systems, ensuring consistent response, accurate level matching, and precise time alignment across every speaker.
Using high-resolution measurement and advanced correction, ARC X creates a custom response that makes your audio sound clear and natural.
The result: a monitoring environment you can trust — so you work faster and mix with confidence.

What makes ARC X different

Built on over a decade of R&D, ARC X combines real-time calibration, reference emulation, and flexible tuning. Immersive support automates complex system alignment for faster, more precise, consistent results.
ARC X brings over a decade of R&D into a single, seamless solution — combining real-time calibration, reference emulation, and flexible tuning.
With immersive support for iLoud monitors, ARC X now automates one of the most complex studio setup processes, delivering full-system alignment that is faster, more precise, and more consistent than manual methods.
- Measure quickly and precisely
- Auto correction for a perfectly balanced sound
- Fine-tune to match your preferences

Integration across the iLoud Ecosystem

ARC X integrates seamlessly with IK monitoring solutions, forming a scalable and future-proof system. From stereo to iLoud immersive setups, ARC X provides a unified calibration platform.
Compatible devices:
- iLoud Precision MKII
- iLoud Precision MKI
- iLoud Micro Monitor Pro
- iLoud MTM MKII
- iLoud Sub
- ARC Studio Hardware

Real-world studio calibration

Built for real-world studios, it supports Dolby Atmos, spatial audio, post-production, and immersive music workflows.

Minutes, not hours

Complete system calibration in minutes instead of hours with fully automated multichannel alignment and subwoofer integration.

Immersive calibration

ARC X scales from stereo and stereo-plus-sub correction into full multichannel and immersive monitoring up to 9.1.6 with compatible ARC-enabled iLoud monitors.

Hardware ecosystem support

Run ARC X correction on ARC-enabled iLoud monitors directly, or use ARC Studio hardware to bring calibration to any third-party monitor system.
TECHNOLOGY
Specs
System Requirements
Mac® (64-bits)
Minimal: Apple M1 or Intel® Core i5 Processor, 4 GB of RAM, macOS® 10.15 or newer (macOS 11 or newer required for Apple Silicon Processors).
Supported Plug-in formats: Audio Units, VST 3, AAX.
Works with any audio interface with a phantom powered XLR microphone input and a pair of outputs for monitoring.
44.1 kHz or 48 kHz sampling rate is required for the measurement process.
Windows® (64-bits)
Minimal: Intel® Core i5 Processor or equivalent, 4 GB of RAM, Windows 10 (64 bit) or newer.
Supported Plug-in formats: VST 3, AAX.
Works with any audio interface with ASIO drivers, a phantom powered XLR microphone input and a pair of outputs for monitoring.
44.1kHz or 48kHz sampling rate is required for the measurement process.
Requires an OpenGL 2 compatible graphics adapter.

Key capabilities

Fully automated multichannel calibration
Complete level and time alignment
Supports immersive systems up to 9.1.6
Guided workflow for fast, error-free setup
Embedded hardware calibration on iLoud and ARC Studio

Audiophile performance

120 dB dynamic range with AKM Velvet Sound converters and 32-bit float processing deliver sonically invisible, transparent correction you can trust.

Improves any studio

ARC X Immersive is designed for real environments where perfect placement isn’t always possible. Connect to any monitor system and instantly improve your monitoring accuracy.

Customize your monitors

Fine-tune your monitors' performance to taste with customizable target curves. Shape the sound to match your mixing preferences and workflow.
VIDEOS
ARC X - Room Correction Overview

ARC X - Room Correction Overview

RELATED PRODUCTS

ARC picks

Explore related ARC products

ARC X - Microphone included

ARC X

Advanced room correction plug-in and measurement microphone.

$99.99 excl.VAT
($121.99 incl.VAT)
See more
ARC X - Software only

ARC X - Software only

Advanced multi channel room correction. Only available with 3+ iLoud monitors compatible or 2+ ARC Studio units.

$79.99 excl.VAT
($97.59 incl.VAT)
ARC StudioSALE!

ARC Studio

Standalone digital acoustic correction system

$349.99$299.99 excl.VAT
($365.99 incl.VAT)
Total Value $349.99
You Save $50.00
See more
ARC Measurement Microphone

ARC Measurement Microphone

The ARC Measurement Microphone is designed for accurate room analysis and calibration across the ARC ecosystem. Compatible with...

$79.99 excl.VAT
($97.59 incl.VAT)
See more

* Trademark & Non-Affiliation Notice

Trademarks or registered trademark property of IK Multimedia Production Srl. All rights reserved.

Mac, the Mac logo, the Audio Units logo, iPhone®, iPod touch®, iPad® are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Windows and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. VST is a trademark of Steinberg Media Technologies GmbH. AAX, Avid, the Avid logo, Pro Tools, and RTAS are trademarks or registered trademarks of Avid Technology, Inc. in the U.S. and other countries.

All other product names and images, trademarks and artists names are the property of their respective owners, which are in no way associated or affiliated with IK Multimedia. Product names and images are used solely for the purpose of identifying the specific products that were studied during IK Multimedia's sound model development and for describing certain types of tones produced with IK Multimedia's digital modeling technology. Use of these names and images does not imply any cooperation or endorsement.

IK Multimedia disclaims any ownership over content uploaded by users to ToneNET, including but not limited to Tone Models, Presets, and any text or symbols that users upload with their content. IK Multimedia does not endorse or represent any users of ToneNET, and any names, trademarks, or tradenames that users may upload with their content on ToneNET should not be construed as an endorsement, association, or affiliation with IK Multimedia. Users represent and warrant that they own or are licensed to use all intellectual property, including copyrights and trademarks, in any content that they upload. IK Multimedia disclaims that any content uploaded by users is non-infringing. Please see the ToneNET Terms of Use with ways that you can notify us if you believe content on ToneNET infringes your rights.

More info on third party trademarks