iRig Keys I/O 25
iRig Keys I/O 25 combines a 25-key MIDI controller and professional 24-bit/96 kHz audio interface in one compact music production system.Its 25 full-size velocity-sensitive keys...
$229.99
excl.tax
iRig Keys I/O
Your studio. Anywhere.
The all-in-one music production station that goes anywhere you want
STARTING FROM$229.99(excl. tax)
Rates from 0-36% APR. Payment options through Shop Pay Installments are subject to an eligibility check and are provided by these lending partners: affirm.com/lenders. Options depend on your purchase amount, and a down payment may be required. State notices to consumers: affirm.com/licenses.
All installment options
The iRig® Keys I/O series evolves the concept of traditional controllers as the only one available on the market that integrates 25 or 49 full sized keys together with a fully-fledged professional audio interface featuring 24-bit audio up to 96kHz sampling rate, balanced stereo and headphone outputs, plus a combo input jack for line, instrument or mic input (with Phantom power.)
See Specs
Microphone Input
Microphone Type: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: 3.2 kOhms
Gain Range: 46 dB
Phantom Power: +48V ± 4V
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -100 dB RMS
Instrument Input
Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -100 dB RMS
Line Output
Line Outputs: 2x balanced, TRS 1/4” Jack, Tip: hot / Ring: cold / Shield: ground
Floating Balanced Outputs with automatic level compensation when working in unbalanced mode
Maximum Output Level: +13 dBu into 600 Ohms balanced load
Frequency Response: from 10 Hz to 21 kHz (+/- 0.2dB)
Output Dynamic Range: 102 dB(A)
Output Impedance: 150 Ohms balanced
Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Power 100mW into 50 Ohms
Other Input/Output
DC barrel: 1x DC barrel. For power and device charging.
Device Connector: mini-DIN
External Pedal Input: 1/4" TRS Jack
Common
Conversion: 16 or 24-bit A/D - D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
Power:
• USB bus powered when used with a computer
• Battery powered (4xAA included) when used with an iOS device
• DC power supply (not included, iRig PSU 3A sold separately)**
Keyboard
Keys: 25 or 49 (depending on the version) full-size keys with velocity
Pads
8 velocity-sensitive multi color assignable pads
Controls
Slider strips for pitch and modulation (user programmable)
Octave, program change and transport
5 programmable touch sensitive encoders
Package includes
iRig Keys I/O 49 or 25 keyboard (depending on the version)
Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
USB-A to Mini-DIN connection cable (60cm/23.62")
USB-C to Mini-DIN connection cable (60cm/23.62")
iPhone/iPad stand
4 x 1.5V AA Battery
iRig Keys I/O 49 Dimensions
Size: 693mm/27.3" x 208mm/8.2" x 65mm/2.6"
Weight: 2.18kg/76.9oz (batteries excluded)
iRig Keys I/O 25 Dimensions
Size: 373mm/14.7" x 208mm/8.2" x 65mm/2.6"
Weight: 1.26kg/44.5oz (batteries excluded)
Compatibility
iOS Devices
Made for: iPhone 7 Plus*, iPhone 7*, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (12.9-inch) 1st Generation, iPad Pro (9.7-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 5th generation, iPad 4th generation. iOS 6 or later is required.
Also compatible with all newer iPhone, iPad and iPod touch models.
*Note for iPhone 7, iPhone 7 Plus, iPad 9.7-inch (6th generation 2018): iOS 12 or later is required.
Computers
Mac®: macOS® 10.6 or later. One free USB port.
Windows®: One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed.
** Use only the specified AC adaptor
Use only the specified AC adaptor (iRig PSU 3A) and make sure the line voltage at the installation matches the input voltage specified on the AC adaptor's body. IK Multimedia will not be responsible of any damage caused by usage of any AC adaptor other than the specified one (iRig PSU 3A).
The usage of AC adaptors other than the specified one (iRig PSU 3A) could compromise the user experience in terms of: Safety risk, Apple device charging performances, Noise performances.
iRig Keys I/O Mic Specifications
Microphone Input
Microphone Type: gooseneck
Capsule Type: condenser, electret
Polar Pattern: cardioid
Capsule Size: 0.55"
Frequency Response: 100 Hz - 15 kHz -3 dB
Maximum Sound Pressure: 130 dB SPL (1% THD @1kHz)
Sensitivity: -36dB (@1kHz, 0dB=1V/Pa)
S/N ratio: 75dB
Connector Type: male 3-pin XLR
Length: 47cm/18.5"
Weight: 140g/4.94oz
Click to zoom · Esc to close
A total music production system in a controller
Together with an audio interface, iRig Keys I/O also packs all the controls you would expect from a premium controller including velocity sensitive multicolored pads and programmable touch-sensitive sliders, buttons and knobs for unique expressiveness and fast workflow. Both iRig Keys I/O 25 and 49 are also the smallest full sized keys on the market making them the best solution for working in small spaces and ideal when it comes to having a controller for traveling musicians, in addition to the consideration that they are the only truly mobile devices that can also work on AA batteries.
SOFTWARE
INCLUDED SOFTWARE
How to get the free bonus content.
Cubasis LE
Mobile Music Production Application By Steinberg Media Technologies.
Unlock the feature set of Cubasis LE for free.
Unlock the feature set of Cubasis LE for free.
2 Free Bonus Software Titles
Get 2 free additional bonus software titles of your choice from the following titles:
- AmpliTube 5 SE
- Miroslav Philharmonik 2 CE
- MixBox SE
- MODO BASS 2 SE
- MODO DRUM SE 1.5
- SampleTank 4 SE
- T-RackS 5 SE
- AmpliTube 5 SE
- Miroslav Philharmonik 2 CE
- MixBox SE
- MODO BASS 2 SE
- MODO DRUM SE 1.5
- SampleTank 4 SE
- T-RackS 5 SE
Specs
Microphone Input
Microphone Type: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: 3.2 kOhms
Gain Range: 46 dB
Phantom Power: +48V ± 4V
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -100 dB RMS
Instrument Input
Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -100 dB RMS
Line Output
Line Outputs: 2x balanced, TRS 1/4” Jack, Tip: hot / Ring: cold / Shield: ground
Floating Balanced Outputs with automatic level compensation when working in unbalanced mode
Maximum Output Level: +13 dBu into 600 Ohms balanced load
Frequency Response: from 10 Hz to 21 kHz (+/- 0.2dB)
Output Dynamic Range: 102 dB(A)
Output Impedance: 150 Ohms balanced
Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Power 100mW into 50 Ohms
Other Input/Output
DC barrel: 1x DC barrel. For power and device charging.
Device Connector: mini-DIN
External Pedal Input: 1/4" TRS Jack
Common
Conversion: 16 or 24-bit A/D - D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
Power:
• USB bus powered when used with a computer
• Battery powered (4xAA included) when used with an iOS device
• DC power supply (not included, iRig PSU 3A sold separately)**
Keyboard
Keys: 25 or 49 (depending on the version) full-size keys with velocity
Pads
8 velocity-sensitive multi color assignable pads
Controls
Slider strips for pitch and modulation (user programmable)
Octave, program change and transport
5 programmable touch sensitive encoders
Package includes
iRig Keys I/O 49 or 25 keyboard (depending on the version)
Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
USB-A to Mini-DIN connection cable (60cm/23.62")
USB-C to Mini-DIN connection cable (60cm/23.62")
iPhone/iPad stand
4 x 1.5V AA Battery
iRig Keys I/O 49 Dimensions
Size: 693mm/27.3" x 208mm/8.2" x 65mm/2.6"
Weight: 2.18kg/76.9oz (batteries excluded)
iRig Keys I/O 25 Dimensions
Size: 373mm/14.7" x 208mm/8.2" x 65mm/2.6"
Weight: 1.26kg/44.5oz (batteries excluded)
Compatibility
iOS Devices
Made for: iPhone 7 Plus*, iPhone 7*, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (12.9-inch) 1st Generation, iPad Pro (9.7-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 5th generation, iPad 4th generation. iOS 6 or later is required.
Also compatible with all newer iPhone, iPad and iPod touch models.
*Note for iPhone 7, iPhone 7 Plus, iPad 9.7-inch (6th generation 2018): iOS 12 or later is required.
Computers
Mac®: macOS® 10.6 or later. One free USB port.
Windows®: One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed.
** Use only the specified AC adaptor
Use only the specified AC adaptor (iRig PSU 3A) and make sure the line voltage at the installation matches the input voltage specified on the AC adaptor's body. IK Multimedia will not be responsible of any damage caused by usage of any AC adaptor other than the specified one (iRig PSU 3A).
The usage of AC adaptors other than the specified one (iRig PSU 3A) could compromise the user experience in terms of: Safety risk, Apple device charging performances, Noise performances.
iRig Keys I/O Mic Specifications
Microphone Input
Microphone Type: gooseneck
Capsule Type: condenser, electret
Polar Pattern: cardioid
Capsule Size: 0.55"
Frequency Response: 100 Hz - 15 kHz -3 dB
Maximum Sound Pressure: 130 dB SPL (1% THD @1kHz)
Sensitivity: -36dB (@1kHz, 0dB=1V/Pa)
S/N ratio: >75dB
Connector Type: male 3-pin XLR
Length: 47cm/18.5"
Weight: 140g/4.94oz
VERSIONS
Select your version and instantly explore all the included gears in the section below
iRig Keys I/O 49
iRig Keys I/O 49 combines a 49-key MIDI controller and professional 24-bit/96 kHz audio interface in one complete music production system.Its 49 full-size velocity-sensitive keys...
$329.99
excl.tax
VIDEOS
AMPLITUBE 5 - Overview
iRig Keys 2
Compact universal MIDI keyboard controller with 37 mini-keys and audio output for iPhone, iPad, Android, Mac/PC and more.
$149.99
excl.VAT
iRig Keys 2 Mini
Ultra-compact universal MIDI keyboard controller with 25 mini-keys and audio output for iPhone, iPad, Android, Mac/PC and more.
$129.99
excl.VAT
SOLD OUT
iRig BlueBoard
iRig BlueBoard is a wireless Bluetooth MIDI pedalboard that puts hands-free control of music apps and software at...
$119.99
excl.VAT
See moreSOLD OUT
iRig BlueTurn
iRig BlueTurn is a compact Bluetooth page-turn controller that lets musicians, speakers and performers navigate digital sheet music...
$79.99
excl.VAT
IK PSU 9175 (iRig PSU 9175)
Power supply unit for: AXE I/O iRig Micro Amp iRig Pro Duo iRig Pro Duo I/O iRig Pro...
$39.99
excl.VAT
Lightning to Micro-USB cable
Lightning to Micro-USB cable for: iRig HD 2 iRig Pro I/O iRig Pro Duo iRig Mic Studio 60...
$29.99
excl.VAT
Lightning to Mini-DIN cable with Charging
Lightning to Mini-DIN cable with Charging for: iRig Pro Duo I/O iRig Pro Quattro I/O 60 cm/23.62"
$29.99
excl.VAT
Micro-USB-OTG to Micro-USB cable
Micro-USB-OTG to Micro-USB cable for: iRig HD 2 iRig Pro I/O iRig Pro Duo iRig Mic Studio 60...
$29.99
excl.VAT
* Trademark & Non-Affiliation Notice
Trademarks or registered trademark property of IK Multimedia Production Srl. All rights reserved.
Mac, the Mac logo, the Audio Units logo, iPhone®, iPod touch®, iPad® are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Windows and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. VST is a trademark of Steinberg Media Technologies GmbH. AAX, Avid, the Avid logo, Pro Tools, and RTAS are trademarks or registered trademarks of Avid Technology, Inc. in the U.S. and other countries.
All other product names and images, trademarks and artists names are the property of their respective owners, which are in no way associated or affiliated with IK Multimedia. Product names and images are used solely for the purpose of identifying the specific products that were studied during IK Multimedia's sound model development and for describing certain types of tones produced with IK Multimedia's digital modeling technology. Use of these names and images does not imply any cooperation or endorsement.
IK Multimedia disclaims any ownership over content uploaded by users to ToneNET, including but not limited to Tone Models, Presets, and any text or symbols that users upload with their content. IK Multimedia does not endorse or represent any users of ToneNET, and any names, trademarks, or tradenames that users may upload with their content on ToneNET should not be construed as an endorsement, association, or affiliation with IK Multimedia. Users represent and warrant that they own or are licensed to use all intellectual property, including copyrights and trademarks, in any content that they upload. IK Multimedia disclaims that any content uploaded by users is non-infringing. Please see the ToneNET Terms of Use with ways that you can notify us if you believe content on ToneNET infringes your rights.