iRig Pro Duo I/O
iRig Pro Duo I/O is a portable 2-in/2-out audio and MIDI interface for recording music, podcasts, video and...
$229.99
excl.VAT
iRig Pro I/O
Your new pocket-sized mobile studio
Professional mobile recording interface for all devices
$169.99(excl. tax)
Rates from 0-36% APR. Payment options through Shop Pay Installments are subject to an eligibility check and are provided by these lending partners: affirm.com/lenders. Options depend on your purchase amount, and a down payment may be required. State notices to consumers: affirm.com/licenses.
All installment options
- 1-in/1-out audio and MIDI interface
- Works with iPhone, iPad, Mac and PC
- Combo XLR/TRS input with phantom power
- MIDI In/Out
- 24-bit/96 kHz
See Specs
iRig Pro I/O Specifications
Microphone Input
Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: 3.2 kOhms
Gain Range: 40 dB
Phantom Power: +48V ± 4V
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS
Instrument Input
Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Control numbered thumbwheel
Headphone Level Power 100mW into 50 Ohms
MIDI Input/Output
Connector: 2x2.5mm TS Jack
Other Input/Output
DC barrel: 1x DC barrel. For power and device charging.
Device Connector: mini-DIN
Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
Power: USB bus powered when used with a computer; battery powered (2xAA included) when used with an iOS device; DC power supply (not included, iRig PSU 3A sold separately)
Package includes
iRig Pro I/O universal Audio-MIDI interface
Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
USB-A to Mini-DIN connection cable (60cm/23.62")
USB-C to Mini-DIN connection cable (60cm/23.62")
2.5mm TRS male to MIDI female adapter (10cm / 3.9")
2 x 1.5V AA Battery
Velcro strip
Dimensions
Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
Weight: ~120g/4.23oz (batteries excluded)
Compatibility
iOS Devices
Made for: iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (12.9-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 4th generation.
Also compatible with all newer iPhone, iPad and iPod touch models.
Computers
Mac®: Mac OS X 10.6 or later. One free USB port.
Windows®: One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed.
Android Devices
Compatible with Android devices running Android 5 or later and with USB digital audio capabilities. Micro-USB-OTG to Mini-DIN cable (sold separately) is required.
* Use only the specified AC adaptor
Use only the specified AC adaptor (iRig PSU 3A) and make sure the line voltage at the installation matches the input voltage specified on the AC adaptor's body. IK Multimedia will not be responsible of any damage caused by usage of any AC adaptor other than the specified one (iRig PSU 3A). The usage of AC adaptors other than the specified one (iRig PSU 3A) could compromise the user experience in terms of: Safety risk, Apple device charging performances, Noise performances.
Click to zoom · Esc to close
Your new pocket-sized mobile studio
iRig Pro I/O is a compact 24-bit/96 kHz audio and MIDI interface for recording microphones, instruments and MIDI gear with iPhone, iPad, Mac and PC.
Its combo XLR/TRS input handles microphones and instruments, with +48 V phantom power for condenser mics, while MIDI In/Out lets you connect keyboards, controllers and other MIDI gear. A headphone output provides convenient monitoring, and flexible battery, USB or optional DC power makes iRig Pro I/O a portable recording solution wherever you work.
SOFTWARE
INCLUDED SOFTWARE
How to get the free bonus content.
Essentials Bundle for AmpliTube CS for iPhone
Upgrade from CS (FREE) version to PAID version – for FREE.
Essentials Bundle for AmpliTube CS for iPad
Upgrade from CS (FREE) version to PAID version – for FREE.
Cubasis LE
Mobile Music Production Application By Steinberg Media Technologies.
Unlock the feature set of Cubasis LE for free.
Unlock the feature set of Cubasis LE for free.
TONEX SE
Standalone application and plug-in to create, play and share Tone Models. Includes 200+ Tone Models.
1 Free Bonus Software Title
Get 1 free additional bonus software title of your choice from the following titles:
- AmpliTube 5 SE
- Miroslav Philharmonik 2 CE
- MixBox SE
- MODO BASS 2 SE
- MODO DRUM SE 1.5
- SampleTank 4 SE
- T-RackS 5 SE
- AmpliTube 5 SE
- Miroslav Philharmonik 2 CE
- MixBox SE
- MODO BASS 2 SE
- MODO DRUM SE 1.5
- SampleTank 4 SE
- T-RackS 5 SE
Get started
Here's how to register your product and download your Free Bonus Content and manuals.
-
Create your IK Multimedia account
If you're not an IK registered user yet, create your IK Multimedia account. Already have one? Skip this step.
-
Register and authorize your product
Download and install the IK Multimedia Product Manager, the standalone app for registration, downloads, installation, authorization, updates, user manuals and Free Bonus Content. Already installed? Skip the download.
Run the Product Manager and click Register to register and authorize your product. Once it's registered, the Product Manager lists all your Free Bonus Content, ready to download and authorize.
Specs
iRig Pro I/O Specifications
Microphone Input
Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: 3.2 kOhms
Gain Range: 40 dB
Phantom Power: +48V ± 4V
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS
Instrument Input
Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Control numbered thumbwheel
Headphone Level Power 100mW into 50 Ohms
MIDI Input/Output
Connector: 2x2.5mm TS Jack
Other Input/Output
DC barrel: 1x DC barrel. For power and device charging.
Device Connector: mini-DIN
Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
Power: USB bus powered when used with a computer; battery powered (2xAA included) when used with an iOS device; DC power supply (not included, iRig PSU 3A sold separately)
Package includes
iRig Pro I/O universal Audio-MIDI interface
Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
USB-A to Mini-DIN connection cable (60cm/23.62")
USB-C to Mini-DIN connection cable (60cm/23.62")
2.5mm TRS male to MIDI female adapter (10cm / 3.9")
2 x 1.5V AA Battery
Velcro strip
Dimensions
Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
Weight: ~120g/4.23oz (batteries excluded)
Compatibility
iOS Devices
Made for: iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (12.9-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 4th generation.
Also compatible with all newer iPhone, iPad and iPod touch models.
Computers
Mac®: Mac OS X 10.6 or later. One free USB port.
Windows®: One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed.
Android Devices
Compatible with Android devices running Android 5 or later and with USB digital audio capabilities. Micro-USB-OTG to Mini-DIN cable (sold separately) is required.
* Use only the specified AC adaptor
Use only the specified AC adaptor (iRig PSU 3A) and make sure the line voltage at the installation matches the input voltage specified on the AC adaptor's body. IK Multimedia will not be responsible of any damage caused by usage of any AC adaptor other than the specified one (iRig PSU 3A). The usage of AC adaptors other than the specified one (iRig PSU 3A) could compromise the user experience in terms of: Safety risk, Apple device charging performances, Noise performances.
VIDEOS
AMPLITUBE 5 - Overview
SOLD OUT
iRig Pro Quattro I/O
iRig Pro Quattro I/O is a professional 4-in/2-out portable audio and MIDI interface and mixer built for field...
$349.99
excl.VAT
See moreSOLD OUT
iRig Pre 2
iRig Pre 2 is a compact XLR microphone preamp that makes it easy to use your favorite microphone...
$59.99
excl.VAT
iRig Pre HD
iRig Pre HD is a high-definition digital microphone interface that lets you record professional XLR microphones with iPhone,...
$119.99
excl.VAT
IK PSU 5300 (iRig PSU 3A)
$39.99
excl.VAT
Lightning to Mini-DIN cable
$29.99
excl.VAT
Lightning to Mini-DIN cable with Charging
Lightning to Mini-DIN cable with Charging for: iRig Pro Duo I/O iRig Pro Quattro I/O 60 cm/23.62"
$29.99
excl.VAT
Micro-USB-OTG to Mini-DIN cable
$29.99
excl.VAT
USB-C to Mini-DIN cable
USB-C to Mini-DIN cable for: iRig Pro Duo I/O iRig Pro Quattro I/O 60 cm/23.62"
$29.99
excl.VAT
USB to Mini-DIN cable
USB to Mini-DIN cable for: iRig Pro Duo I/O iRig Pro Quattro I/O 60 cm/23.62"
$29.99
excl.VAT
* Trademark & Non-Affiliation Notice
Trademarks or registered trademark property of IK Multimedia Production Srl. All rights reserved.
Mac, the Mac logo, the Audio Units logo, iPhone®, iPod touch®, iPad® are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Windows and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. VST is a trademark of Steinberg Media Technologies GmbH. AAX, Avid, the Avid logo, Pro Tools, and RTAS are trademarks or registered trademarks of Avid Technology, Inc. in the U.S. and other countries.
All other product names and images, trademarks and artists names are the property of their respective owners, which are in no way associated or affiliated with IK Multimedia. Product names and images are used solely for the purpose of identifying the specific products that were studied during IK Multimedia's sound model development and for describing certain types of tones produced with IK Multimedia's digital modeling technology. Use of these names and images does not imply any cooperation or endorsement.
IK Multimedia disclaims any ownership over content uploaded by users to ToneNET, including but not limited to Tone Models, Presets, and any text or symbols that users upload with their content. IK Multimedia does not endorse or represent any users of ToneNET, and any names, trademarks, or tradenames that users may upload with their content on ToneNET should not be construed as an endorsement, association, or affiliation with IK Multimedia. Users represent and warrant that they own or are licensed to use all intellectual property, including copyrights and trademarks, in any content that they upload. IK Multimedia disclaims that any content uploaded by users is non-infringing. Please see the ToneNET Terms of Use with ways that you can notify us if you believe content on ToneNET infringes your rights.