Cart
Your cart is empty
ONE BOARD. A UNIVERSE OF TONE.
World-class TONEX sound meets extraordinary versatility
TONEX Board puts 76 studio-grade effects across 9 categories at your feet, including 51 effects from AmpliTube, 15 TONEX effects, and 10 all-new effects. From AmpliTube’s Dynamic Saturation Modeling™ to the latest TONEX processors, you get a powerful collection built for exceptional sound, realism, and dynamic response. Freely place and route effects across flexible signal paths to shape everything from essential pedalboard setups to expansive creative rigs.
Ambass’dor
’80s British distortion with a full amp in one pedal
AmpLess
Bass preamp DI staple for vintage-to-modern grit
Big Pig
Sustain-heavy fuzz from smooth to buzz-saw distortion
Booster
20dB clean boost for solos and driving your rig harder
Crusher
Aggressive digital distortion with sample-rate crunch
Distortion
Versatile ’78 distortion, from subtle crunch to mayhem
Fuzz Age
Classic germanium fuzz for expressive lead tones
Fuzz One
Vintage fuzz behind a famous Rolling Stones riff
Metal Distortion
Extreme-gain distortion built for pure metal mayhem
Metal Distortion 2
Rare ’80s distortion for deep, dark metal crunch
Octa-V
Fuzz with frequency-doubling for an octave-up note
OctoBlue
Fuzz plus a two-octave-down duplicate signal
OctoDist
Octave fuzz update with switchable Fat/Bright modes
ODX
Touch-sensitive overdrive with tube-amp complexity
Overdrive
Aggressive, collectible overdrive that pushes amps harder
OverScream
Go-to overdrive/distortion favored by top guitarists
Power Core
High-gain distortion with a precise 3-band active EQ
Pro Drive
Versatile distortion from light crunch to shred gain
RightFuzz
Rare 1966 fuzz, one of the first floor pedals ever
Treble Booster
Bright booster for a singing, cutting lead tone
Tube Overdrive
Tube-driven overdrive with rich 12AX7 distortion
VariDiode+
Distortion with three switchable clipping diode types
Auto Pan
Move your signal across the stereo field with smooth or tempo-synced motion
Chorus-1
Classic bucket-brigade analog Chorus and Vibrato
Electric Flanger
Warm vintage flanger with chorus and ring-mod tones
Flanger Doubler
Flanger plus doubler for massive layered rhythm tone
FOX Phaser
Rare pedal-controlled phaser with a distinctive sweep
Metal Flanger
Iconic ’80s flanger for unmistakable hard-rock tone
Opto Tremolo
Vintage optical tremolo effect
Phazer 9
One of the most popular phasers ever made
Phazer10
Classic analog multimode phaser stomp box
Small Phazer
Compact analog phaser, from gentle to swirling
TX Chorus
Lush stereo chorus adds rich dimension and movement to clean and driven tones
TX Flanger
From subtle comb filtering to dramatic jet sweeps with wide stereo movement
TX Phaser
Fluid, swirling phase shifts add motion and depth without softening your attack
TX Rotary
Spinning-speaker modulation with organic acceleration, pulse and stereo depth
TX Tremolo
Classic amplitude modulation from gentle vintage pulse to locked rhythmic chop
Uni-V
Vintage optical chorus/rotary-speaker simulator
Pitch Shifter Mono
Shift a mono signal for harmonies, detuned doubling and creative intervals
Pitch Shifter Stereo
Create wide pitch-shifted harmonies, detuning and stereo doubling effects
Octav
Dual-voice octave pedal, one and two octaves down
Parametric EQ 3 Mono
3-band parametric EQ for precise tone shaping
Parametric EQ 3 Stereo
3-band parametric EQ for precise tone shaping
10 Band Graphic
Clean 10-band graphic EQ for dialing in your tone
Bass Wah
Classic wah with an auto mode, no controller needed
Envelope Filter
Touch-responsive filter from auto-wah to extreme sounds
NU-Tron III
Classic ’72 automatic filter loved on funk and keys
Wah
Classic wah with an easy-to-use auto function
WahDist
Classic wah with built-in high-gain distortion
63 Reverb
Classic all-tube spring reverb, lush surf-style tone
TX Spring 1
Spring reverb with lively reflections, natural bounce and adjustable vintage depth
TX Spring 2
Spring reverb with lively reflections, natural bounce and adjustable vintage depth
TX Spring 3
Spring reverb with lively reflections, natural bounce and adjustable vintage depth
TX Spring 4
Spring reverb with lively reflections, natural bounce and adjustable vintage depth
TX Plate
Smooth studio plate reverb with dense reflections and a rich, even decay
TX Room
Natural room reflections that add realistic depth without masking your core tone
Hall
Spacious hall reverb with broad reflections and a smooth, extended decay
Shimmer 1
Reverb with one pitch-shifted voice, from subtle harmony to octave shimmer
Shimmer 2
Reverb with two parallel pitch voices for rich, layered harmonic ambience
Dcomp
Vintage compression stomp pedal
TX Comp
Smooth dynamic control that evens levels while preserving attack and character
TX Noise Gate
Reduce hiss and unwanted noise for cleaner high-gain tones and tighter riffs
Parallel Comp (ST)
Blend compressed and dry stereo signals for sustain without losing attack
Analog Delay
Classic analog delay with built-in modulation
Arctic
Atmospheric delay that combines shimmer with filterable repeats
Duck
Delay repeats move behind your playing, then rise naturally between phrases
EchoMan
Classic bucket-brigade analog echo/delay with modulation
EP Tape Echo
Gold-standard vintage tape echo for wild psychedelia
Harm Delay
Pitch-shifted delay repeats create harmonies, melodic patterns and layered echoes
Slap Back
Short single-repeat echo for vintage depth, rhythmic punch and added presence
Twin Repeat
Two independent delay lines create wide rhythms and complex stereo repeats
TX Digital Delay
Clean, precise digital repeats for synced rhythms, leads and stereo echoes
TX Tape Delay
Warm tape-style delay with softened repeats, saturation and natural movement
Swiss Tool
Adjust pan, stereo width, timing and polarity for precise signal management
Volume
Traditional volume pedal
FX Loop
Insert external pedals or processors anywhere within your complete signal chain
After registering TONEX Board and installing the software, connect the Board by USB-C, launch TONEX Board Editor, and install the latest firmware before continuing. The latest firmware is required for the best experience.
Download and install the IK Multimedia Product Manager
Use IK Product Manager to register your hardware and install the TONEX software suite.
Sign in or create your IK Multimedia account
Open IK Product Manager and log in with your IK Multimedia credentials.
Register your TONEX Board
Enter the serial number supplied with your TONEX Board.
Download and install TONEX software
Install/update the TONEX software suite and authorize it. During the installation ensure that TONEX Board Editor is selected. You will use Board Editor to update the firmware before continuing.
Update TONEX Board firmware
Connect TONEX Board to your computer via USB-C and launch TONEX Board Editor. The application will automatically detect if an update is available. If an update is available, follow the on-screen instructions to install the latest firmware. Keep power and USB connected until the update is complete.
Connect your instrument and output
Plug your guitar or bass into Input 1, then connect XLR Out 1–2, Output 3–4, or headphones.
Open the tuner
- In any mode: Press footswitches B + C together to open the tuner.
- In Preset Mode: You can also press and hold the footswitch for the active preset. To exit the tuner and return to playing, press any footswitch.
Load a preset and start playing
Press the Browse knob to open the Preset Browser, rotate to preview a preset, and press to load it.
Installed with the TONEX software suite, TONEX Board Editor is the required tool for firmware updates. After updating, use it to transfer Tone Models, presets, and custom IRs from your computer and to back up the Board setlists.
If TONEX Board Editor still doesn't let you see your TONEX Board after installing and authorizing the TONEX software, try to follow these steps:
After your purchases are restored the TONEX Board Editor should correctly see the connected TONEX Board.
For any further help with the installation process please contact our support team.
The TONEX 2.0.4 Player Public Beta is available to all TONEX users. As a registered TONEX Board user, you unlock the complete Board signal chain and effects in TONEX software, where you can create, play, and organize complete rigs—or record with them using the TONEX plug-in in your DAW.
The beta installer includes TONEX 2.0 Player, TONEX Modeler, TONEX Editor (for older TONEX hardware), and TONEX Board Editor.
How to installInstalling the beta replaces your current TONEX applications, so back up your TONEX library first.
Traditional Amp
1. Connect. Run an analog output from TONEX Board to the amp input or effects-loop return.
2. Bypass cabinets if needed. If you are using TONEX Board together with a real guitar/bass cabinet, we suggest bypassing any cabinet in your TONEX Board preset. To do so: Open Settings → Global → General and enable Global Cabinet bypass.
FRFR / PA / monitors
1. Connect. Use XLR Out 1–2 or Outputs 3–4.
2. Keep cabinets on. If there is not a real guitar/bass cabinet running after TONEX Board, we suggest using a Tone Model with its cabinet, VIR cabinet, or custom IR enabled.
USB audio recording coming October 1, 2026
Beginning October 1: Install the latest TONEX Board firmware through TONEX Board Editor, then connect the Board to your computer by USB-C.
In your DAW: Select TONEX Board as the audio input and output, create a track, choose the desired Board input, arm the track, and record.
Headphones
1. Connect. Plug headphones into the mini-TRS headphone output.
2. Set volume. Start low, play, and raise the Volume knob to a comfortable level.
Level Check
1. Open the Audio Panel. Tap the Settings gear in the upper-right, then select Audio Panel.
2. Check the input. Play your instrument at normal performance level and watch the meter for the input you are using.
3. Set the input level. Adjust that input until the signal is strong but does not clip.
4. Set the output level. Play again and adjust the active output for your amp, PA, monitors, headphones, or recording setup.
TONEX Board footswitches can operate in three different modes:
Preset Mode: to operate using presets.
Scene Mode: to operate with scenes within a preset.
Stomp Mode: to activate/bypass any slot assigned to a footswitch.
Preset Mode
Select: Tap the mode icon until Preset is shown.
Use: Press A, B, or C to load a preset. To browse banks, make sure Footswitch is set to Release under Settings > Global > General. Then press A + B together for the previous bank, or C + CTRL together for the next bank.
Scene Mode
Select: Press the CTRL footswitch or tap the mode icon to cycle through the available modes until Scene Mode is shown.
Use: Press A, B, or C to recall a scene. Assign a parameter: Press EDIT, press and hold the parameter, then select Scene Mode.
Stomp Mode
To use TONEX Board in Stomp Mode:
Assign a slot: Press EDIT, press and hold the slot, select Assign, then press A, B, or C.
Use: Select Stomp Mode, then press the assigned footswitch to enable or bypass the slot.
Shortcut: Press CTRL when it is assigned to Mode Cycling, or tap the mode icon in the upper-left of the display.
TONEX Board has three different views:
Home View lets you access the main information of the selected preset.
Edit View lets you edit the selected preset chain.
Live View displays the most useful information when playing live.
Home View
Open: Press HOME.
Use: Rotate the Browse knob to select presets. Use the five parameter knobs to adjust the assigned Quick Parameters.
Edit View
Open: Press EDIT.
Use: Touch a slot, input, or output to edit the rig; swipe or rotate Browse knob to choose gear. Touch the selected slot or an empty slot on chain to open the gear browser.
Live View
Open: Press LIVE.
Use: Check each footswitch assignment and adjust Quick Parameters while performing.
To show the selected preset chain, press the EDIT button to display the EDIT VIEW.
Choose a chain layout
Serial: Place up to 12 slots in series.
Split / Mix: Press and hold a slot on Path A, then add a Split and/or Mix block to use Path B for parallel processing.
Independent paths: Press and hold the input and output modules to add a second input and output. Assign each path its own input and output to create two independent six-slot signal chains.
Set the input
1. Select: Touch the Input A module.
2. Assign: Choose Input 1, Input 2, Input 1–2, Return 1, Return 2, or Return 1–2.
Set the output
1. Select: Touch the Output A or B module.
2. Assign: Choose XLR Out 1, XLR Out 2, XLR Out 1-2, Output 3, Output 4, Output 3-4, All (1-2 and 3-4). You can also use Send 1, Send 2 or Send 1-2 as additional outputs.
Add a Quick Parameter
1. Select: Select the gear containing the parameter.
2. Assign: Press and hold the parameter, then select Quick Parameter.
3. Use: Return to Home or Live View to adjust it.
Once you've finished editing the selected presets, press SAVE to save them.
To show the selected preset chain, press the EDIT button to display the EDIT VIEW.
External controls
TONEX Board can be controlled with up to 2 external control pedals.
Connect an external pedal to EXT. CTRL 1 or 2, then configure it from the Board:
• Open Settings → Global → External Control, then select EXT. CTRL 1 or EXT. CTRL 2.
• Choose Single Switch, Double Switch, or Expression Pedal and set its function. For an expression pedal, select CALIBRATE and follow the on-screen range prompts.
To create a macro, press EDIT, press and hold a parameter, select the external control, then set the parameter’s minimum and maximum values.
GLOBAL EQ
Tailor each output for its destination.
You can tweak both XLR Output 1-2 and Output 3-4 with a global EQ. To set the global EQ for an output:
1. Open Global EQ. Tap the Settings gear in the upper-right, then select Global EQ.
2. Choose an output pair. Select XLR Out 1–2 or Output 3–4.
3. Adjust the EQ. Set the available EQ controls while listening through the selected destination.
4. Set the other output if needed. Switch to the other output pair and create a separate EQ setting.
Global EQ settings are independent for XLR Out 1–2 and Output 3–4, so you can optimize each connection separately.
Unlike standalone processors, TONEX Board is the heart of a complete hardware and software ecosystem. It unifies every stage of your workflow, from capturing gear and exploring tones to managing presets and performing live. Powered by AI Machine Modeling® and studio-grade effects, it delivers thousands of Tone Models and presets across flexible dual signal paths, giving you unmatched freedom to create, organize, and expand your sound with no limits.
How to get the free bonus content.
SALE!
Bring your favorite Tone Models to your pedalboard and prepare your live presets with real-time editing in TONEX...
SALE!
Dedicated bass edition of TONEX Pedal. AI Machine Modeling™ for bass. Over 60,000 free Tone Models on ToneNET....
SOLD OUT
NEWSALE!
A compact TONEX pedal for recording, rehearsal, and performance. Fine-tune your sounds in real time with TONEX Editor.
Dedicated capture hardware for creating Tone Models of real gear with TONEX Modeler.
SALE!
TONEX ONE Bass Edition brings IK Multimedia's AI Machine Modeling™ technology to bass players in an ultra-compact, pedalboard-ready...
SOLD OUT
TONEX ONE Double Special Limited Edition brings IK Multimedia's award-winning AI Machine Modeling™ technology together with the exclusive...
SOLD OUT
SOLD OUT
SOLD OUT
SOLD OUT
Trademarks or registered trademark property of IK Multimedia Production Srl. All rights reserved.
Mac, the Mac logo, the Audio Units logo, iPhone®, iPod touch®, iPad® are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Windows and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. VST is a trademark of Steinberg Media Technologies GmbH. AAX, Avid, the Avid logo, Pro Tools, and RTAS are trademarks or registered trademarks of Avid Technology, Inc. in the U.S. and other countries.
All other product names and images, trademarks and artists names are the property of their respective owners, which are in no way associated or affiliated with IK Multimedia. Product names and images are used solely for the purpose of identifying the specific products that were studied during IK Multimedia's sound model development and for describing certain types of tones produced with IK Multimedia's digital modeling technology. Use of these names and images does not imply any cooperation or endorsement.
IK Multimedia disclaims any ownership over content uploaded by users to ToneNET, including but not limited to Tone Models, Presets, and any text or symbols that users upload with their content. IK Multimedia does not endorse or represent any users of ToneNET, and any names, trademarks, or tradenames that users may upload with their content on ToneNET should not be construed as an endorsement, association, or affiliation with IK Multimedia. Users represent and warrant that they own or are licensed to use all intellectual property, including copyrights and trademarks, in any content that they upload. IK Multimedia disclaims that any content uploaded by users is non-infringing. Please see the ToneNET Terms of Use with ways that you can notify us if you believe content on ToneNET infringes your rights.
