iRig Stomp I/O

Specs

iRig Stomp I/O Specifications

Common

Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
Power: USB bus powered (when used with a computer) or DC IN
Device Connection: USB B-Type and Mini-DIN
Enclosure: metal sheet

Microphone Input

Connector: balanced female 3-pin XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: approx 2 kOhms
Gain Range: approx 48 dB
Phantom Power: +48V ± 4V
Frequency Response: 20 Hz – 20kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS

Instrument Input

Connector: unbalanced, Hi-Z, TS 1/4" Jack. Tip: signal / Shield: ground
Instrument Input Level: from 30mVpp to 6.9Vpp
Instrument Input Impedance: 1MOhms
Gain Range: approx 27dB
Frequency response: 20 Hz – 20kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS

Stereo Headphone Output

Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level control: numbered thumbwheel
Headphone Output Power: 100mW into 50Ohms

Stereo Line Output

Connector: 2x balanced female 1/4" TRS Jack. Tip: hot / Ring: cold / Shield: ground
Maximum Output Level: +16 dBu into 600 Ohms balanced load
Output Impedance: 150 Ohms balanced
Floating Balanced Outputs

MIDI Input/Output

Connector: 2x 5-pin DIN

Connections and Controls

Top Panel

Four metal foot-switches with one indication LED each, dual color
Two analog potentiometers for Input GAIN and output VOLUME
"Stomp MODE" LED
"Phantom 48V" LED
"PEDAL" LED
4 segments mono input level meter (peak)
4 segments device output meter
Continuous pedal (expression pedal) with virtual switch at the top of its travel

Rear Panel

Neutrik Combo socket for MIC input and Instrument input (auto selecting)
+48V phantom power switch
1/4" headphones output
2 x 1/4" TRS Balanced floating line outputs
MIDI I/O 5-pin DIN connectors
2 x 1/4" TRS External controllers sockets
B-Type USB socket for connecting a computer (Mac/PC)
Mini-DIN "iOS" connector for connecting an iOS device
Barrel DC-in socket for powering up the Stomp I/O and charging the iOS device
at the same time

Package includes

iRig Stomp I/O
Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
USB A-Type to USB B-Type connection cable (2.5m/8.2ft)
DC power supply

Dimensions

Size: 41.5cm/16.3" x 21cm/8.5" x 7.2cm/2.83"
Weight: 3.2kg/7.1lb
Lightning to Mini-DIN connection cable (60cm/23.62")
USB A-Type to USB B-Type connection cable (2.5m/8.2ft)

Compatibility

iOS Devices

Made for: iPhone 8 Plus, iPhone 8, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (10.5-inch), iPad Pro (12.9-inch) 2nd generation, iPad Pro (12.9-inch) 1st generation, iPad Pro (9.7-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 5th generation, iPad 4th generation.

Also compatible with all newer iPhone, iPad and iPod touch models.

*Note for iPhone 7, iPhone 7 Plus, iPad 9.7-inch (6th generation 2018) users: iOS 12 or later is required.